Made Cost in China Servo Drive 1kw 3000rpm Single Phase Servo Drive with ce certificate top quality low price

Product Description

Made In CZPT servo drive 1kw single phase 

Item Specifications
Model Type MZ630PSI 1R6 2R8 5R5 7R6 012 018
Outlook Applicable motor 200W 400W 750W 0.8-1kW  1.5kw  2-3kW
W(mm) 42 56 65
H(mm) 160 160 160
D(mm) 148 148 185
Weight(kg) 0.8 1.0 1.5
Input CZPT Single phase AC200V-240V,-15%~10%,50/60Hz or three phase AC200V-240V,-15%~10%,50/60Hz three phase AC200V-240V,
Model Type MZ630PTI 8R4 012 017 571 026
outlook Applicable motor 2kW 3kW 4.5kW 5.5kW 7.5kW
W(mm) 110
H(mm) 222
D(mm) 200.80
Weight(kg) 4.0
Input CZPT three phase AC380V-440V,-15%~10%,50/60Hz
Specification Environment ºC Use environment humidity 0~55ºC
Storage environment humidity -20~65ºC
Humidity Use environment humidity 20~85% RH below(No condensation)
Storage environment humidity 20~85% RH below(No condensation)
Use to preserve ambient air indoor(no CZPT ),No corrosive gas, flammable gas, oil mist, dust
altitude Below 1000m
vibration 5.8m/s2(0.6G)below 10~60Hz(Can not be used continuously at resonance frequency)
Insulation withstand voltage Basic-FG between AC1500V 1min
Control way Three-phase PWM converter sine wave drive
Encoder feedback 1: Provincial line 2500 line
2: 17bit (after adding a battery, it can be used as a multi-turn absolute encoder)
Control signal  Input 9 inputs (DC24V optocoupler isolation) switch according to the control mode function
Output 5 output (DC24V optocoupler isolation, open collector output) switch according to the control mode function
Pulse signal Input 2 inputs (optocoupler isolation, RS-422 differential, open collector output)
Output 4 outputs (A/B/Z phase RS-422 differential; Z phase open collector output)
Communication function RS232 For PC communication (for “Servostudio” connection)
RS-485 For upper remote control communication (1:n)
CAN CANOPEN bus communication
Regeneration function Optional regenerative resistor, external regenerative resistor. Pay attention to modify internal parameters
Dynamic brake YES
Control model 6 control modes: speed control, position control, torque control, torque/speed control, speed/position control, torque/position, torque/speed/position hybrid control
Function Control input Alarm reset, proportional action switching, zero fixed function enable, forward drive prohibited, reverse drive prohibited, external torque limit for forward rotation, external torque limit for reverse rotation, forward jog, reverse jog, forward Reset switch, reverse reset switch, origin switch, emergency stop, servo enable, gain switch
Control output Servo ready, motor rotating, zero speed signal, speed reached, position reached, positioning approach signal, torque limit, speed limit, brake output, warning, servo failure, alarm code (3-digit output)
Position control
Pulse input Maximum command pulse frequency Differential input: high-speed maximum 4Mpps, pulse width cannot be less than 0.125μs
The maximum low speed is 500Kpps, and the pulse width cannot be less than 1μs
Open collector: maximum 200Kpps, pulse width cannot be less than 2.5μs
Input pulse signal form Differential input; open collector
Input pulse signal method Pulse + direction, right angle phase difference (A phase + B phase), CW + CCW pulse
Command pulse division/multiplication
(Electronic gear ratio setting)
0.1048576 < B/A <419430.4
Command filter Smoothing filter, FIR filter
Pulse output Output pulse form Phase A, Phase B: CZPT ential output
Z phase: differential output or open collector output
Frequency division ratio Arbitrary frequency division
Output pulse function Encoder position pulse and position pulse command (can be set)
Speed control Control input Servo ON, alarm reset, speed command reverse, zero speed clamp, internal command selection input 1, internal command selection input 2, internal command selection input 3, internal command selection input 4, forward rotation external torque limit input, reverse rotation External torque limit input, emergency stop
Control output Alarm status, servo preparation, brake release, torque limit output, speed limit output speed reached, speed consistent, motor rotation output, zero-speed signal output
Torque Control Control input Servo ON, alarm reset, torque command reverse, zero speed clamp
Control output Alarm status, servo preparation, brake release, torque limit, speed limit output, emergency stop
Torque command input (Factory default setting, the range can be set by function code)
Speed limit function Positive and negative internal speed limit P03.27, P03.28
Common Speed observer function YES
Damping control function YES
Adaptive notch filter YES
Automatic adjustment function YES
Encoder output frequency division YES
Internal location plHangZhou function YES
function setting
Use the host computer setting software “Servostudio” to adjust
Protection Over voltage, abnormal CZPT supply, overcurrent, overload, abnormal encoder, overspeed, excessive position deviation, abnormal parameters, etc.

1. we use carton box to make package.

2.Also, we support CZPT made according to CZPT er’s needs.

1. Are you factory?
Yes, we are facotry, and we produce AC motor/driver, Servo motor/driver and planetary reducer for more then 13 years in CZPT .

2. How to select models?
Before purchasing, please contact us to confirm model No. and specifications to avoid any misunderstanding.

3. How do you ship the goods?
We normally ship goods by sea ,by express(DHL/UPS/FEDEX/EMS), and by air, also accept CZPT er appointed.

4. Can I test sample?
Yes, sample charged can be offered for testing.
5. Can we be agent or distributor?
Yes, welcome and we will support you.

6. Can you do CZPT or ODM service?
Yes, we have R&D department and accept CZPT and ODM service.

7. How about warranty?
18 MONTH warranty, technical support CZPT , we always try CZPT best to help CZPT ers to solve problems